Some leaks announce themselves. Others hide — behind a wall, under the slab, out in the yard — quietly running up your water bill and soaking the structure for weeks before you see a stain. By the time it's visible, the damage is already spreading.
We find hidden leaks without tearing your home apart. Using acoustic listening, thermal imaging, and moisture mapping, we pinpoint the source, then coordinate the repair and handle any water damage the leak already caused. Call (201) 277-9344 if you suspect a leak you can't find.
Signs of a hidden leak
- A water bill that jumped with no change in usage
- The sound of running water when everything is turned off
- A warm spot on the floor (a sign of a hot-water slab leak)
- Unexplained damp spots, stains, or a musty smell
- Low water pressure or a water meter that moves when nothing's on
- Cracks in flooring or foundation with no obvious cause
What our leak detection service includes
- Water-meter check to confirm an active leak and gauge its severity
- Acoustic listening and thermal-imaging location of the hidden source
- Non-invasive pinpointing before any wall, floor, or slab is opened
- Moisture mapping to trace where the escaped water has already traveled
- The exact leak marked so the repair is targeted, not exploratory
- Repair coordination so access and demolition stay minimal
- Drying and restoration of any water damage the leak already caused
Need help right now in Rocklin? Our line is open 24/7.
(201) 277-9344Non-invasive detection saves your floors and walls
The old approach was to guess and cut — opening walls and floors hunting for the source. We don't work that way. Acoustic equipment listens for the leak, thermal imaging shows temperature differences from escaping water, and moisture meters trace where it's traveled. That lets us mark the exact spot before anyone opens anything.
Precise detection means a smaller, cheaper repair and far less damage to your home. It also means we're not drying and rebuilding areas that were never affected.
Slab leaks and Rocklin's aging plumbing
Slab leaks — pipes failing under the concrete foundation — are increasingly common in Rocklin's 1990s and 2000s slab-on-grade homes as original copper reaches the end of its service life. Our hard water accelerates pinhole corrosion, and a slab leak can run for a long time before it surfaces.
We locate slab leaks accurately so the repair can be targeted rather than exploratory. And because a slab leak that's been running has usually caused water damage, we're ready to dry and restore the affected area once the pipe is fixed.
Our leak detection process
- 1
Interview & meter check
We review the symptoms with you and check the water meter to confirm an active leak and gauge its severity.
- 2
Non-invasive location
Using acoustic sensors, thermal imaging, and moisture mapping, we pinpoint the leak's exact location without unnecessary demolition.
- 3
Pinpoint & coordinate repair
We mark the source precisely and coordinate the repair, so the fix is targeted and access is minimized.
- 4
Dry & restore
We address any water damage the leak caused — drying the structure and restoring affected materials.
What affects leak detection cost
Detection cost depends on how accessible the leak is and what it takes to confirm the source:
- Leak location — under slab, behind walls, in the yard, or in the roof
- How much equipment and time locating it requires
- Whether repair and water damage restoration are also needed
- Access and depth of the affected system
- Extent of any damage the leak already caused
Why choose Restoration Rocklin CA for leak detection & repair coordination
A hidden leak can soak your structure for weeks before a stain ever shows. Finding it shouldn't mean tearing your house apart. We locate slab, wall, and yard leaks non-invasively with acoustic listening, thermal imaging, and moisture mapping — marking the exact spot before anyone opens a wall. Then we coordinate the repair and dry whatever the leak already damaged, all with one Rocklin team.
- Non-invasive location with acoustic listening, thermal imaging, and moisture mapping — we pinpoint the leak before cutting into any wall or slab.
- A 60-minute local response dispatched 24/7, so a leak running up your bill and soaking your structure is found fast.
- IICRC-certified, licensed, and insured technicians who trace the source precisely instead of guessing and cutting.
- We document the damage the leak caused, bill insurance directly, and dry the structure to a verified standard once it's repaired.
- Locally owned in Rocklin — we know the slab-on-grade homes and hard-water corrosion behind most local hidden leaks.
Leak Detection & Repair Coordination across Rocklin & Placer County
We provide leak detection & repair coordination to homes and businesses throughout Rocklin — across ZIP codes 95765 and 95677 — and the surrounding Placer and Sacramento County communities, usually within 60 minutes of your call. Wherever you are in the area, a local crew and the right equipment are close by.
Leak Detection & Repair Coordination — questions & answers
We use acoustic listening equipment, thermal imaging cameras, and moisture meters to locate leaks behind walls and under slabs non-invasively. That means we can mark the exact spot before any wall or floor is opened.
A slab leak is a pipe failing beneath your concrete foundation. It's serious because it can run undetected for a long time, damaging flooring and framing and feeding mold. Early detection makes the repair far smaller. Call (201) 277-9344 if you notice a warm floor spot or a bill spike.
We pinpoint the leak and coordinate the repair, and we handle the water damage restoration side directly — drying and restoring whatever the leak affected so you deal with one team.
Detection cost depends on where the leak is and how much equipment and time it takes to confirm the source — a yard line is different from a leak under the slab. Because non-invasive location keeps the repair small and targeted, it usually saves far more than it costs. Call (201) 277-9344 and we'll walk you through what your situation involves.
A simple check: turn off every water fixture and watch your water meter for 15 minutes. If it keeps moving, water is escaping somewhere. Other tells are a warm spot on the floor, a jump in your bill, or the faint sound of running water. Any of those is worth a call before the damage surfaces.
